Quick Tips

Have a great idea or solution? Share with the group here!

This forum contains 8 topics and 61 replies, and was last updated by  Yashesh Sheth October 19, 2016.

Viewing 8 topics - 1 through 8 (of 8 total)
    • Topic
    • Voices
    • Posts
    • Last Updated
  • Alex Touchstone
    Alex Touchstone made the first post
    Hi All,     Recently, I taught a hands-on course at Planmeca University.  During the course, we had a lively discussion around how to pick the ideal block color and translucency.  That prompted me to write this post in the hope that what I am sharing here will help you make sense of controlling the…
    mennito
    mennito made the last post
    Great tip Graeme.  I will give that a try.  Thanks.
    Wally Renne
    Wally Renne made the first post
    Yashesh Sheth made the last post
    Amazing skills!! Was the small green tooth to get a design proposal for the wings?
    Ken Schwartz made the first post
    I have the scanner which I love!!! I do not mill restorations. I have been having problems, when i do short crownlays i have problems with the retention of the temps. I usually use fynal. When this fails i'll use duralon  with a little vaseline I find straight duralon is a pain to get off…
    Bachar Saba
    Bachar Saba made the last post
    Not as cosmetic though I completely agree with mike GET A MILL
    Michael Martin
    Michael Martin made the first post
    I received an email today about an upgrade to full color scanning.  What's the story?   Michael  
    Cliff Leachman made the last post
    Good to hear! 
    Michael Martin
    Michael Martin made the first post
    I've noticed that when we design inlays, there is often lots of ceramic proposed above the margin.  Is there a way to turn that off?   Thanks,   Michael  
    Michael Martin
    Michael Martin made the last post
    Thanks!
    Michael Martin
    Michael Martin made the first post
    With the current mill,   Is it possible to mill an undercut? (or does the geometry of the mill prevent it)   Which tool mills below the external height of contour of a crown? (as defined by the sprue placement)   Thanks,   Michael    
    Yacman
    Yacman made the last post
    Suggestions for the engineers, "show" undercuts with specific colour like 3Shape and DenatlWings do, then measure as to correctable with spacer /die spacer choice...why not giving us control such as BUCCAL 175 microns spacer....M,D,L, O 100 microns... Allowing us specific region additional spacer could assist on black/grey hiding... My brother, the PhD from MIT says…
    Yen Lu
    Yen Lu made the first post
    I love it when I discover a new product that works! Why didn't I invent this SMH! NEW PRODUCT DIRECTA http://youtu.be/l9jnrslFYas Identifying contact points on crowns and bridges has never been easy. Before cementation of conventional crowns, bridges and implant prosthetics, it is necessary to assess the relationship of the crown to the neighboring teeth.…
    Yen Lu
    Yen Lu made the last post
    Oh good idea Mike!  I'm going to try this with my little Schein flossers and if it works I will post it. I agree it is pricey but I'm willing to pay the big bucks for the ease and convenience.
    Alex Touchstone
    Alex Touchstone made the first post
    Hi All,   I have been working on a couple of articles recently that will publish soon.  Here's one of them in advance of publication. Please forgive the more formal tone than is the norm for our forum and please let me know how helpful this is to you...   __________________________________________________________ Introduction   One of…
    Bachar Saba
    Bachar Saba made the last post
    I agree with mike This is the one tool that I can never function without I had orascoptic light that was awesome for 3-4 years until the wire starting to show wear For the price of fixing it I got a brand new light from another company , not as bright but good enough for…
Viewing 8 topics - 1 through 8 (of 8 total)

You must be logged in to create new topics.