How to design e.max Bridges

This topic contains 3 replies, has 2 voices, and was last updated by Mike Kelliher Mike Kelliher September 19, 2016.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #5045

    rlinndmd
    Participant

    This training video will teach you how to design e.max bridges with either the new or the classic system (software version 4.6 or later).

    How to design e.max Bridges

    #10228

    rlinndmd
    Participant

    When you fire the bridge do you just put a little object fix on each abutment or do you fill it it up like your doing a single unit

    #10227

    rlinndmd
    Participant

    So when you peg the two teeth to fire your just using a little object fix/flow

    #15463
    Mike Kelliher
    Mike Kelliher
    Keymaster

    Sorry I missed this post, yes when I fire a bridge (or any restoration) I just use a bit of object fix in each abutment. ¬†Normally I’ll peg one of the abutments, do the stain and glaze, and then put the second peg in. ¬†And remember you’ll need to use the regular size firing tray and the regular paste glaze crystallization cycle.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.